As an Amazon Associate I earn from qualifying purchases.
1. Arducam #ad
Arducam Mini Module Camera Shield with OV2640 2 Megapixels Lens for Arduino UNO Mega2560 Board #adArducam #ad
- Can be used in mcu, arm, dsp, raspberry Pi, FPGA platforms. I2c interface for the sensor configuration，SPI interface for camera commands and data stream.
Build-in 650nm iR block filter, visible light only. M12 mount or cs mount lens holder with changeable lens options. 2 megapixels image sensor OV2640 .
2. Arducam #ad
Arducam Mini Module Camera Shield 5MP Plus OV5642 Camera Module for Arduino UNO Mega2560 Board #adArducam #ad
- The arducam mini can be used in any platforms like arduino, Maple, Raspberry Pi, Chipkit, Beaglebone black, esp8266, as long as they have SPI and I2C interface and can be well mated with standard Arduino boards.
It integrates 5mp cmos image sensor ov5642, and provides miniature size, as well as the easy to use hardware interface and open source code library. Arducam mini module camera shield 5mp plus ov5642 camera Module is a general purpose high definition 5MP SPI camera, which reduce the complexity of the camera control interface.
It can be used in iot, robot, wildlife, HDR and Other battery-powered products or scientific image processing applications. Support jpeg compression mode, one time capture multiple read operation, single and multiple shoot mode, burst read operation, short movie recording, low power mode and etc.
3. MELIFE #ad
MELIFE ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP for Arduino, Support Image WiFi Upload and TF Card #adMELIFE #ad
- Low-power dual-core 32-bit CPU for application processors. Package included: 1* esp32-cam module, 1* camera Module; Operating Temperature: -20 -- 85 degree celsius.
Built-in 520 kb sram, 802. 11g: 14+/-2 dbm @54mbps, external 4m psram; transmit power: 802. 11b: 17+/-2 dbm @11mbps, 802. 11n: 13+/-2 dbm @mCS7.
Bluetooth: bluetooth 4. 2 br/edr and ble standard; wi-fi: 802. 11 b/g/n/e/i; support interface: uart, spi, i2c, PWM; Support TF Card: Maximum support 4G. Supports interfaces such as uart/spi/i2c/pwm/adc/dac; support ov2640 and OV7670 cameras, built-in flash; Support image WiFi upload and Support TF card.
4. HiLetgo #ad
HiLetgo 2pcs OV7670 640x480 0.3Mega 300KP VGA CMOS Camera Module I2C for Arduino ARM FPGA #adHiLetgo #ad
- Automatic influence control functions include: automatic exposure control, automatic gain control, automatic elimination of light streaks, automatic white balance, automatic black level calibration, hue, image quality control including color saturation, gamma, sharpness ANTI_BLOOM.
Resolution 640x480 VGA. Io voltage 2. 5v to 3. 0v internal lDO power supply to the core 1. 8v. Power operation 60mW/15fps VGAYUV. Rawrgb, rgb grb4:2:2, rgb565/555/444, yuv4:2:2 and ycbcr4:2:2 output formats.
5. Xiuxin #ad
2 Pack ESP32-CAM WiFi Bluetooth Camera Module Development Board ESP32 with Camera Module OV2640 #adXiuxin #ad
- The esp32cam equips the esp32 with everything necessary to program, run and develop on the wonderchip. The esp32cam is a tiny module based on esp32 chip and ov2640 Esp integrates wifi, on-chip sensor, hall sensor, traditional bluetooth and BLE Beacon, temperature sensor, with 2 high-performance 32-bit LX6 CPUs, main frequency adjustment range 80MHz to 240MHz, 7-stage pipeline architecture, etc.
Fully compliant with wifi 802. 11b/g/n/e/i and bluetooth 4.
2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices. It is suitable for home smart devices, QR wireless identification, industrial wireless control, wireless monitoring, wireless positioning system signals and other IoT applications.
Additionally, the board reserved the MPU6050, BME280 and an analog MIC. You can even program the esp32cam through the ESP-IDF by installing the ESP32 Core. It is an ideal solution for IoT applications. Esp32-cam can be widely used in various iot applications.
|Part Number||esp32 cam|
6. MakerFocus #ad
ESP32 Camera ModuleArduino Camera, Mini Camera Board for Arduino, OV2640 2 Mega Pixels Camera, Raspberry Pi Camera, Raspberry Pi 3B/3B+ and Pi 2B+ IOT DIY, with Type C Port and 3D WiFi Antenna #adMakerFocus #ad
- The board reserved the mpu6050, BME280 and an analog MIC. This module with a ip5306 ic chip and it can be used with lithium battery Standard voltage: 3. 7v4. 2v. User guide: https://docs. M5stack. Com/#/en/quick_start/m5camera/m5camera_quick_start; Github: https://github.
Com/m5stack/m5stack-cam-psram. M5stack esp32 camera: the m5stack esp32 camera is a tiny module based on esp32 chip and ov2640 sensor. Ov2640 camera module: the camera is cmos camera, cmos size: 1/4", field of view : 65 degree, maxmium pixel: 200m pixels Because of the small RAM, the board can’t obtain it.
You can program it through the ESP-IDF. It can output images up to 800*600 JPEG.
Ov2640 sensor's parameter:standard sccb interface, compatible with i2c interface;output formats8-bit is yuv422/420/ycbcr422; rgb565/555; 8-bit compressed data; 8-/10-bit Raw RGB data; UXGA/SXGA: 15fps; SVGA: 30fps; CIF: 60fps; Scan Mode: Progressive. For people: software / hardware product engineers, start-ups, designers, project contractors, enthusiasts, educational groups amd Maker groups.
7. ELEGOO #ad
ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE #adELEGOO #ad
- This is the upgraded starter kits with power supply module, 9V battery with dc. Lcd1602 module with pin header not need to be soldered by yourself. The most economical kit based on Arduino platform to starting programming for those beginners who are interested.
Free pdf tutorialmore than 22 lessons and clear listing in a nice package. 100% compatible with arduino uno r3, MEGA 2560 R3, NANO. High quality kite with uno r3.
8. ideaspark #ad
ESP32 CAM Arduino Kits Monitor Snapshot Face Detection Recognition WiFi Bluetooth Camera Module with 128M SD Card USB to Serial Cable HC-SR501 Sound Sensor Compatible for Arduino IDETutorial #adideaspark #ad
- Hc-sr501:when someone approach human infrared pir body sensor, when people leave, output low. Not repeat/repeatable 2 trigger mode. Sensitivity and Time Delay is adjustable. Sensing angle
9. DORHEA #ad
Dorhea Raspberry Pi 4 B 3 B+ Camera Module Automatic IR-Cut Switching Day/Night Vision Video Module Adjustable Focus 5MP OV5647 Sensor 1080p HD Webcam for Raspberry Pi 2/3 Model B Model A A+ #adDORHEA #ad
- Compatible with -- raspberry pi camera module kit compatible with Raspberry Pi model B/B+/A+/4/3/2/1. High quality -- 100% brand new and in good condition, with high quality, great performance, solid construction.
Ir-cut camera -- it's built-in ir-cut camera, automatically switch day and night mode for better and clearer image during the day and night. Csi interface -- this interface uses the dedicated CSI interface, via the CSI bus, a higher bandwidth link which carries pixel data from the camera back to the processor.
Camera specifications -- the camera is capable of 2592 x 1944 pixel static images, and also supports 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p 60/90 video recording, with 5MP OV5647 1080p webcam sensor.