As an Amazon Associate I earn from qualifying purchases.
1. FENGWANGLI #ad
Surge Protector Mount Punch Free Cable Management System, 5 Pack Self Adhesive Power Strip Mount, Power Strip Holder #adFENGWANGLI #ad
- Power strip holder- especially designed for power strip, WiFi Router, paper towel boxes, adapters and remote control, simple installing your power strip and say goodbye to mess. Widely used- fixed power strip, routers, adapters, bathroom, tile, office, glass, remote control, etc for kitchen, paper towel boxes, bedroom wall, etc.
This wall hooks dont work well on paint walls. Might damage the paint.
Compatibility- power strip mount holder for amazonBasics, Bototek, Belkin, GE Power Strip, TESSAN, Prime Wire & Cable and most other mountable power strips. Simple and fast installation- punch-free mounted, self adhesive acrylic transparent adhesive, paste without residue, strong load bearing, the stronger the adhesion, the longer the bonding time, the maximum load is up to 5kg.
Order includes 5 pairs. Warm reminder- as the temperature is getting lower, the stickiness will become weaker, so it is suggested to heat the tape with a hair dryer to make it stick more tightly.
2. Tidysun #ad
Wall Mounted Surge Protector Holder and Cable Holder in Office Home Kitchen,Power Strip Mount for WiFi Router Tissue BoxWhite, 5Pack Tidysun Self Adhesive Power Strip Holder #adTidysun #ad
- Warrantyplease feel free to contact with us for replacement or refunds if there is any issue with your purchase. B>removable acrylic adhesivethe removable acrylic adhesive allows you to remove it in any surface, multiple times uses while still maintaining the initial adhesion and has a long use-life.
B>power strip organizerself adhesive power strip holder can fix the power board under the table or on the wall, helping you manage the cables, reducing the clutter of the wires, give you a tidy clean room.
B>1-shaped track design self adhesive power strip Holder adopts a front and back push-pull design, you can easily fix and separate without worrying about the power board not being able to move, very practical and convenient.
B>punching-free &easy to install punch-free mounted, no damage, self-adhesive acrylic transparent glue, you can stick the power strip mount holder at any smooth surface, strong loading capacity, no residual paste, no need to worry about falling.
3. JHGCVX #ad
JHGCVX 16 PCS Creative Thumb Wall Hook Up,Fun Cord Holder,Multifunctional Thumb Cable Clips Adhesive for Home,Office,Student Dormitory,Kitchen,Car #adJHGCVX #ad
- Satisfactory servicewe promise you will love these lovely thumb wall hooks, and our thumb wall hooks support money back or replacement service. If you're not satisfied with these thumb wall hooks or any questions with them, Please contact us! High-quality materialsmade of tpR plastic silicone, long-lasting and strong nano-adhesive, easy to remove without damaging the surface or leaving marks.
Multiple usesgreat grip for almost any cable. It can grip and hold kitchen towels, belts, pens, bath sponges, toothbrushes, keys, jewels and even climbing plants.
You will get8 different colors thumb wall hooks, one for each left and right hand, total 16 pcs, each size about is 1.1 x 07 inch. Easy to usepunch-free mounted, you can stick the silicone thumb hook at any smooth surface, no residual paste, no damage, self-adhesive. Just need to peel off the protective layer, strong loading capacity, no need to worry fall off.
4. Command #ad
5lb Capacity, 1 Hook/PK 17003ES, White Plastic, 3M Command Large Utility Hook #adCommand #ad
- Sold as 1 Pack. The separate backing strip adheres firmly to flat surfaces--but will not damage wall when removed.
5. TXesign #ad
TXesign Adhesive Wall Tablet Holder Mount Stand for Tablet Smartphones eReader Wall Holder Mount Black #adTXesign #ad
- Convenient for charging smartphones or ipad tablets directly from the wall outlet without a desk; Also serving as AC/cellphone cord organizer. Function: 1 ac plug holder when the electric device is not in use； 2 cord organizer； 3 smartphone tablet wall mount.
Material: acrylic, 3m vhb adhesive strips and eva tape; dimensions: 7. 08”l x 1. 5”w x 3. 3”h；package include: 1x Adhesive Wall Holder Mount.
Notice: please make sure the wall you stick is dry and clean also with smooth surface, wait at least 24hours after stick the tablet mount; Not recommend to take it off the painted wall as the 3M VHB adhesive is strong and it will become less sticky if remove oftenly. Universal compatibility with all tablet and mobile phones even with a fat bulky case.
6. SOULWIT #ad
Surge Protector Fixator Wall Mount Punch Free Cable Management System for Remote Control Router Computer Kitchen Home and Office, SOULWIT 3-Pack Self Adhesive Power Strip Holder #adSOULWIT #ad
- At the office and home Max bearing capacity: 8 Pounds/3. 6kg. Works well on: all smooth and cleaned surfaces of desks, cabinets, wood, walls, baseboards, etc. Upgraded adhesive pad: Made of eco-friendly premium Nanogel, easy to remove without traces.
Easy to use: simply peel and stick, no punching, making your home look tidier. Please contact us for replacement or refunds if there is an issue with your purchase. Great space saver: perfect for holding power Strip, Router, Photo frame, etc.
7. Ruaeoda #ad
Ethernet Cable Clips,Ruaeoda 60 Pack 8mm Self-Adhesive Wire Clips, Cord Clamp Cable Management for Cat6 Cat5 and Cat7 Flat Ethernet CableWhite #adRuaeoda #ad
- Multipurpose cable clips organizer. Come with 60 pieces in total, creative approaches is available as you like to utilize them. Easy to use and remove: the cable tie mount can be adhered for immediately use, and can be removed without any damage and residues.
No need to punch a hole or attach any screws. Do not put any weight on them until the adhesive really sticks well. The adhesive cable clips should be idle for more than 2 hours for good viscosity.
Strong adhesive make it grip firmly. Especially suitable for flat network cable. Suitable for cars, even on the wall to manage various cables such as computer cables, home and office, wood furniture, porcelain, glass, glossy cardboard, iron, TV cables, Christmas lights cable, can be used on plastic, ceramic, USB cables and so on. Easy to use.
8. eLhook #ad
ELhook Stick-On Game Controller Hangers 2 Pack #adeLhook #ad
- 2 pack of wide design hooks for hanging most popular game controllers, headphones, cables and other accessories. Search amazon for our matching HEADPHONE HOOKS.
Please note for all corded controllers you need to wrap the cord around the hook for a stable hold. Simple and easy to install and remove with NO DAMAGE AND NO MESS! No tools and no holes in your walls. Holds strong, each hook will hold 7 pounds reliably.
Included small soft rubber GRIPPERS to hold controllers securely. Flat satin black finish compliments your accessories. Will not mar your controller like metal hooks. Each hook includes three scotch brand 3m command adhesive strips. Sleek and stylish design made of super strong, smooth edged ABS plastic.
|Manufacturer||eLhook.com LLC #ad|
9. TFY #ad
Bedroom, Tablet Wall Mount, Bathroom, Fits on Kitchen, TFY Kitchen Wall Mount for Tablets and Smartphones, Readingroom and More Black #adTFY #ad
- Fits 2. 7-3. 9 inch and 4. 2-7. 4 inch Devices. None drill and screwdriver on the Smooth Surface. If necessary, adjust the clamped device slightly to obtained your desired viewing angle.
For unpainted or rough surfaced walls requires Drill and screwdriver! Easy to install your devices on it. Also it could be lifted off the attachment surface for storage elsewhere.
It prefect fits your rooms style as sockets. Compatible with iphone 13 pro max, 12 pro, 11, iphone xr, huawei mate 40 pro and ipad pro 10.5 inch, samsung s10, iphone xs, Xs Max, iPad Mini and more. Easy to store the mount when is not in use.
10. Scotch Mounting, Fastening & Surface Protection #ad
Holds up to 1lb., 16-Squares, 1 in. x 1 in., Scotch Removable Mounting Squares, Grey #adScotch Mounting, Fastening & Surface Protection #ad
- Ensure your surface is smooth, clean and dry for the best bond. Can be used to mount posters photos and lightweight objects to wood ceramic tile painted plaster walls vinyl coated wallcovering glass. X 1 in.
Made in USA. Measures 1-inch. 2 squares hold up to 1/3 lb. Great for use on metal, acrylic, smooth wood, mirrors, glass, plastic and more. Mounts posters and photos with easy removal and no damage to the wall.
Pre-cut foam squares for easy, mess-free application. May damage some substrates upon removal. Removes easily without leaving any residue on ideal surfaces. Not recommended for use on wallpaper, delicate surfaces or walls painted with flat paint.
Size: 1 in. Double-sided adhesive bonds on contact. Foam mounting squares can be used on wood, gloss and semi-gloss painted walls, glass, ceramic tile, and refrigerators. Removes easily with no damage to surface. Use instead of push pins to keep your surfaces looking great. Ideal for lightweight mounting like papers, photos, cards and more.