Top 10 Raspberry Pi 4 Heatsink – Heatsinks

As an Amazon Associate I earn from qualifying purchases.

1. SGTKJSJS

#ad

Raspberry Pi Heatsink Aluminum Heatsink with Thermal Conductive Adhesive Tape for Raspberry Pi 4 Model B, Raspberry Pi 4b Heatsink

#ad
SGTKJSJS #ad - Set of 6 Aluminum heat sinks. Reduce chip hot-spots and increase thermal dissipation surface area for Cooling Cooler Raspberry Pi 4, Raspberry Pi 3 B+. Suitable for the 2019 latest Version Raspberry Pi 4 Model B. Thermal conductive adhesive tape backing. Can be applied with other devices such as beaglebone, MOSFET SCR, IC Chips, VRAM VGA RAM, Southbridge, Northbridge etc.
BrandSGTKJSJS #ad
ManufacturerSGTKJSJS #ad
Height0.23 Inches
Length0.6 Inches
Width0.6 Inches
Part NumberSRP60-HT

2. Geekworm

#ad

Raspberry Pi 4 Computer Model B Armor Aluminum Alloy Passive Cooling Case Compatible with Raspberry Pi 4 Model B Only, Raspberry Pi 4 Armor Case

#ad
Geekworm #ad - All ports and slots of the aluminum alloy case can match with Raspberry Pi 4 Model B computer perfectly; Add 2pcs 2x20 Female Headers to extend the GPIO pin and insert GPIO cable. With 3 pieces thermal pads the thickness is only 05mm to touch the shell body to dissipate heat.

Geekworm raspberry pi 4 armor case, aluminum alloy metal case specially designed for the Raspberry Pi 4 Computer Model B 1GB/2GB/4GB/8GB. Open case design, don't need to worry about affect wifi signal, it is a good raspberry pi 4 heatsink case with good heat dissaption. You can also use the CPU grease not included to get better heat dissipation.

Note: if you think the blue Thermal Tape is not good enough for heat dissaption, you can replce it with thin 05mm cooper heatsink match with silicone grease recommend Shin-Etsu Shin-tsu X-23-7921-5 for better heat dissaption. Reinforced aluminum material, lightweight and durable, long-lasting stainless.
BrandGeekworm #ad
ManufacturerGeekworm #ad
Height0.75 Inches
Length3.39 Inches
Weight0.24 Pounds
Width2.17 Inches
Part NumberTB-2019-19

3. GeeekPi

#ad

Raspberry Pi Low-Profile CPU Cooler with RGB Cooling Fan and Raspberry Pi Heatsink for Raspberry Pi 4 Model B & Raspberry Pi 3B+ & Raspberry Pi 3 Model B Silver, GeeekPi Raspberry Pi 4 Fan

#ad
GeeekPi #ad - Dc 5v power in can be powered by the Raspberry Pi. 5mm copper tube;super heat dissipation;Rated power 04w @5v, 008a. Color led fan with automatic color change. Compatible with raspberry Pi 4B and Raspberry Pi 3 Model B/Model B+.
BrandGeeekPi #ad
ManufacturerGeeekPi #ad
Weight0.33 Pounds
Part NumberEP-0122

4. Geekworm

#ad

Raspberry Pi 4B Armor Aluminum Radiator with 5V Cooling Fan Compatible with Raspberry Pi 4 Model B Computer and Pi 4, Geekworm Raspberry Pi 4 Embedded Heatsink with Fan P165-A

#ad
Geekworm #ad - User manual, please refer to raspberrypiwiki P165. Supports the installation of 25mm fan; cooling fan can be added when the heat dissipation of a single aluminum heat sink is not enough, so that all Pi 4 heat dissipation problems can be solved.

Supports to cooling down the raspberry pi 4 board when using the pi 4 expansion boarddo not support poe board; it is compatible with Raspberry Pi 4 expansion board, X857ASIN:B085HG7ZLJ, for example: X825ASIN:B07VXF2HJG, X750ASIN:B07VPWFK9H to slove the raspberry pi 4 overheat problem. Consider different raspberry pi 4 expansion board has different height after installation, we add a variety of screws and copper spacers with different height as follow: 8 x M2. 5x5 +5mm spacers; 4 x M2.

5x13 +6mm spacers ; 4 x M2. 5x13 +6mm spacers ; 4 x M2. 5x14 +6mm spacers ; 4 x M2. 5x15 +6mm spacers ; 4 x M2. 5x16 +6mm Spacers. Raspberry pi hat positioning hole is m2. 5 internal thread; this design is convenient to fix, use good quality mute 5v cooling fan, don't worry about the noise of fan. This geekworm embedded armor aluminum alloy heatsink is only designed for Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Version, ultra-thin embedded heatsink with ONLY 7mm thickness.
BrandGeekworm #ad
ManufacturerGeekworm #ad
Height0.28 Inches
Length2.56 Inches
Weight0.04 Pounds
Width2.17 Inches
Part NumberTB-2019-38

5. SunFounder

#ad

SunFounder Raspberry Pi 4B Aluminum Case with Dual Fan Aluminium Alloy Heatsink for Raspberry Pi 4 Model/Pi 4B

#ad
SunFounder #ad - Interfaces such as gpio, and 40 pins are reserved, DSI, POE, CSI, which does not prevent other uses. Suppor raspberry pi model: specially designed for Raspberry Pi 4 Mode B Raspberry Pi 4 Model B is NOT Included.

Good heat dissipation: built-in four heat-conducting columns with four 3W thermal tapes plus dual cooling fan, quickly and effectively solve the heating problem of Pi 4B motherboard. Cool design: 100% aluminum alloy material, easy to conduct heat and wear. The shell body with stripes design to help the motherboard cool down. Easily access to use: access to all consumer ports and gsi, camera and gpio Connectors. Accurate slot size: shell slot and port size designed to be accurate and the open design ensures that wifi/Bluetooth signal transmission is not affected.
BrandSunFounder #ad
ManufacturerSunFounder #ad

6. LoveRPi

#ad

LoveRPi Anodized Performance Heatsink Set for Raspberry Pi 4 Model B

#ad
LoveRPi #ad - Most effective solution for reliable performance and longevity. No more messy thermal paste and compatible with LoveRPi Power over Ethernet HAT v2 for Raspberry Pi 4. Maximum frequency for longer: maintain 1. 5ghz for more than a minute before throttling kicks in.

Double-sided thermal transfer tape offers high thermal conductivity and long lasting adhesion in all mounting scenarios. Please attach the heatsinks as pictured to avoid accidental damage to the Raspberry Pi 4 Model B board. Quick and simple installation: peel and stick in the orientation with the most airflow. Must have for raspberry pi 4: the soc and usb 3. 0 bridge require heatsinks since they exceed 50°C. Extreme performance: straight-fin design with twice the height of other heatsinks for extra heat dissipation performance whether actively or passively cooled.

Decrease idle temperatures by 20°F for longer component life and more reliable operation. Long lasting exact fit: cpu and lan chipset heatsinks are fabricated specifically for the Raspberry Pi 4 Model B. Mandatory for applications in high temperature, sealed, or overclocked applications. Other components like lpddr4 and gigabit PHY are best passively cooled since they are near components with higher z-height that may short circuit. That is 5x longer than without a heatsink.
BrandLoveRPi #ad
ManufacturerLoveRPi #ad
Height0.39 Inches
Length0.79 Inches
Width0.39 Inches
Part NumberHS3B
ModelLYSB01J58A2DM-ELECTRNCS

7. MazerPi

#ad

Pi 4 Case, Pi 4 Heatsink for Raspberry Pi 4 Model/Pi 4B, Raspberry Pi 4 Armor Case Metal Case with Dual Fan Aluminium Alloy, Raspberry Pi 4 Fan

#ad
MazerPi #ad - Gpio and all main Connectors are easily access to use. Updated manufacturing Process with Improved CNC Aluminium Alloy Quality. Cool design and nice Looking Raspberry Pi Case With Dual Fan. Comes with high Quality Thermal Tape. Comes with mazerpi dual Cooling Fan; No More Overheating Problem.
BrandMazerPi #ad
ManufacturerMazerPi #ad
Height2.36 Inches
Length3.94 Inches
Width1.57 Inches
Part NumberMP-RP-008
ModelMP-RP-008

8. Easycargo

#ad

Easycargo 20pcs Raspberry Pi 4 Heatsink Kit Aluminum + Copper + 3M 8810 Thermal Conductive Adhesive Tape for Cooling Raspberry Pi 4 B, Raspberry Pi 3 B+

#ad
Easycargo #ad - Can be applied with other devices for cooling vrAM VGA RAM, MOSFET SCR, Southbridge, IC Chips, Northbridge etc. Raspberry pi 4 heatsink kit, 3, suitable for Raspberry Pi 4 B, 2, b, 3 b+, a, B+ boards.3m 8810 thermal conductive double side adhesive tape backing. Raspberry pi not included. Includes 15pcs black anodized aluminum + 5pcs copper heatsink.
BrandEasycargo #ad
ManufacturerEasycargo #ad
Height0.39 Inches
Length2.17 Inches
Weight0.04 Pounds
Width1.18 Inches
Part NumberES-H15B-RPI

9. Pastall

#ad

30 PCS Raspberry Pi 4 Heatsink Kit with Thermal Conductive Adhesive Tape, Aluminum Heat Sink Cooler and Copper Heatsink for Raspberry Pi B B+ 2/3/4

#ad
Pastall #ad - Raspberry pi heatsink copper pad shims with Thermal Conductive Adhesive Tape. Package included :24 pcs aluminum heatsink + 6 pcs copper heatsink. Thermal conductive adhesive tape backing, good performance on heat dissipation and long lasting. Also could be used with other devices such as the Beaglebone. Fits for raspberry pi models a, 3, 4 boards, B, 2, b+, compatible with most Raspberry Pi cases.
BrandPastall #ad
ManufacturerPastall #ad
Part NumberPT2019080501
ModelPT2019080501

10. iUniker

#ad

IUniker Raspberry Pi 4 Fan, Raspberry Pi Fan for Raspberry Pi 4 Model B, Raspberry Pi Dual Fan with Raspberry Pi Heatsink, 3B+/Pi 3 B/Pi 2 B

#ad
iUniker #ad - Efficient drop temp of your Pi by using our heatsink fan. Custom 3m heat conductive strip can make sure you Pi works stable when you are overclocking. Notice: it can't fit retroflag nespi case and case+, if you want use our dual fan in this case, you should modifiy the Retroflag Case and breaking the tabs on the single fan location. Custom size fan can fit most of the raspberry Pi case. Upgrade bearing of this fan not only can make sure outputing a lot of wind, but also quiet enough.
BrandiUniker #ad
ManufactureriUniker #ad
Height1.18 Inches
Length3.15 Inches
Width1.57 Inches
Part NumberIU-RP-034
ModelNA