Top 10 JTAG ISP Programmer – USB Cables

As an Amazon Associate I earn from qualifying purchases.

1. Accrie

#ad

Accrie USB Downloader Jtag ISP Programmer ispDownload Cable Lattice FPGA CPLD HW-USBN-2

#ad
Accrie #ad - Support diamond, isplever, lattice programmer. Interfaces to devices operating at 5VTTL, 3VLVCMOS, 2. 5v, 1. 8v and 1. 5v. Automatically senses and adapts to target i/o voltage. Support all lattice fpga and cpld sc/scm/xp/xp2/ec/ecp2/ecp2m/machxo/machxo2/1000/2000/4000/ECP3. Support win 2k, win8, win xp, win7, win10 and other operating systems. Support for jtag, spi flash programming mode, internal FLASH, etc.
BrandAccrie #ad
ManufacturerAccrie #ad
Part NumberAccrie

2. Fauge

#ad

Fauge USB Isp Download Cable JTAG SPI Programmer for Lattice FPGA CPLD HW-USBN-2

#ad
Fauge #ad - Model number:for lattice ispDOWNLOAD Cables. Operating temperature: -10-40 Celsius. Supply voltage: 5V. Type: drive IC. Condition: New.
BrandFauge #ad
ManufacturerFauge #ad
Part Number324530
Model324530

3. Andifany

#ad

Andifany USB Isp Download Cable JTAG SPI Programmer for Lattice FPGA CPLD HW-USBN-2

#ad
Andifany #ad - Supply voltage: 5V. Type: drive IC. Model number:for lattice ispDOWNLOAD Cables. Condition: New. Operating temperature: -10-40 Celsius.
BrandAndifany #ad
ManufacturerAndifany #ad
Height1.02 Inches
Length4.72 Inches
Weight0.12 Pounds
Width3.35 Inches
Part Number324530
Model324530

4. XYG-AVR

#ad

Atmel-ICE Basic Kit AVR SAM Programmer Debugger Supports JTAG SWD PDI TPI aWire SPI debugWIRE with Additional Adapter and [email protected]

#ad
XYG-AVR #ad - Full source-level debugging in Atmel Studio. Atmel-ice Basic Kit. Supports all built-in hardware breakpoints in the target microcontroller number depends on the OCD module in the target. Powerful development tool for debugging and programming Atmel SAM and AVR microcontrollers, Comes with additional adapter and cables. Supports jtag, awire, pdi, tpi, swd, SPI and debugWIRE interfaces.
BrandXYG-AVR #ad
ManufacturerXYG-AVR #ad
Height50 Centimeters
Length100 Centimeters
Weight100 Kilograms
Width100 Centimeters
Part NumberXYG-Atmel-ICE-B2
Model8541589859

5. Waveshare-AVR

#ad

Waveshare ATMEL AVR Programmer USB AVRISP XPII Compatible Atmel at AVR ISP mk2 mkII in-System Programmer Supports AVR Studio 4/5/6/7 Or Higher Version

#ad
Waveshare-AVR #ad - Upgradable to support future Devices Adjustable ISP programming speed up to 8M frequency. Usb 2. 0 compliant full speed, 12mbps 3 optional cables to target board Powered from USB bus, does not require external power supply. Supports avr studio 4/5/6 or higher version delivered with Firmware For AVR Studio 5, Can Be Updated To Support Other AVR Studio Versions. Supports all avr devices with isp or pdi interface, and certain 51 Devices Programs both Flash and EEPROM. Supports fuses and lock bit Programming Based on AT AVRISP mkII firmware.
BrandWaveshare-AVR #ad
ManufacturerWaveShare #ad
Height3.54 Inches
Length7.09 Inches
Weight0.35 Pounds
Width3.94 Inches
Part NumberUSB AVRISP XPII
ModelUSB AVRISP XPII

6. ELEGOO

#ad

ELEGOO 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit Compatible with Arduino Projects

#ad
ELEGOO #ad - We have always cared about the customer experience and improve the product function details. The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers. Each cable length: about 20 cm /8-inch. Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. Packing in a color box.
BrandELEGOO #ad
ManufacturerELEGOO #ad
Height0.04 Inches
Length0.04 Inches
Weight0.06 Pounds
Width8.27 Inches
Part NumberEL-CP-004
ModelEL-CP-004
Warranty6 months

7. HiLetgo

#ad

HiLetgo FT232RL FTDI Mini USB to TTL Serial Converter Adapter Module 3.3V 5.5V FT232R Breakout FT232RL USB to Serial Mini USB to TTL Adapter Board for Arduino

#ad
HiLetgo #ad - Pin definition: dtr, VCC, rxd, tx, cts, GND. Chipset: ft232rl, not genuine ftdi chip, Working Voltage: 3. 3v/5. 5v. Support win95/98/98se/me/2000/xp/win7 32bit 64bit /Vsita/, do not Support Win8. Rxd/txd transceiver communication indicator, with 500MA self-restore Fuse.
BrandHiLetgo #ad
ManufacturerHiLetgo #ad
Height4 Inches
Length6 Inches
Width0.5 Inches
Part Number3-01-0661-1
Model3-01-0661-1

8. KOOBOOK

#ad

KOOBOOK 1Set USBTiny USBtinyISP AVR ISP Programmer for Arduino Bootloader USB Download Interface

#ad
KOOBOOK #ad - Usbtinyisp is an isp line download based on usb interface designed for avr microcontrollers. Usb power supply, start downloading bootlaoder, open the arduino IDE, after choosing the Bord need to download the hardware name, can provide direct power to the Arduino, in the burn bootloader choose USBtinyISP, then download is completed within 1-2 minutes.

Isp connector: 6-pin and 10-pin, size: 28. 8mm × 61. 6mm. It can be used to download programs for most AVR microcontrollers. The arduino ide is always compatible with the USBtinyISP download line, which is mainly used to download the bootloader.

The download cable to connect the supplied 6 pin connector, can be used as an addition to the Arduino download cable, but also suitable for downloading most of the AVR program. Power supply options: external power supply and USB power supply if using an external power supply chip set ISP10 near yellow jumper cap removed.
BrandKOOBOOK #ad
ManufacturerKOOBOOK #ad
Part NumberKB065

9. Geekstory

#ad

For ATMEL 51 AVR USB ISP ASP Microcontroller Programmer Downloader with Cable + 10Pin to 6Pin Adapter Board for Ender 3 or Ender 3 Pro Geekstory

#ad
Geekstory #ad - If you need technical documentation, in the new page, please click “Geekstory”you can find "Sold by Geekstory" under Buy Now button, click “Ask a question” to email us. This usbasp programmer only supports windows system.

This product can be used to update Ender 3 or Ender 3 Pro firmware. It can be directly connected to the USB interface of the computer, which is very convenient to use. Set programming programming interface, the user can upgrade the downloader firmware, programming is very convenient. Reserved mosi, gnd. Driver installation is required to start the usb to isp. 6pin interface, ret, vcc, miso, SCK, user-friendly connection to the target board.

With power and programming two lights, the asp is the new version, the target board suopports 5V and 3. 3v power supply new self-adaptive automatic speed control, with pin on JP2. The avr usb isp asp microcontroller documentation link cannot be displayed. This usbasp programmer is using onboard atmega8 chip.
BrandGeekstory #ad
ManufacturerGeekstory #ad
Weight0.02 Pounds

10. SENMOD

#ad

A Set AVR ISP USBtinyISP Programmer for Arduino Bootloader USB Download Interface

#ad
SENMOD #ad - Isp connector: 6-pin and 10-pin. The download cable to connect the supplied 6 pin connector, can be used as an addition to the download cable for Arduino, but also suitable for downloading most of the AVR program.

For the arduino, in the burn bootloader choose usbtinyisp, start downloading bootlaoder, open the IDE, after choosing the Bord need to download the hardware name, which can provide direct power to, USB power supply, then download is completed within 1-2 minutes. Size: 28. 8mm × 61. 6mm. Power supply options: external power supply and USB power supply if using an external power supply chip set ISP10 near yellow jumper cap removed.
BrandSENMOD #ad
ManufacturerSenMod #ad
Height0.5 Inches
Length4.5 Inches
Weight0.1 Pounds
Width3 Inches
Part NumberVK-25363