Gimars 3 Pcs Nonslip Unique Measure on Both Ends Design 6 +12 inch Stainless Steel Metal Ruler Kit, Easy to Read Inch&mm&cm Directly, More Polished Edge for School, Office, Architect, Engineers, Craft

#ad
#ad
Gimars #ad - Do not like the others, no space left on both ends, the marking stops before the ruler end. Inch & cm & mm marking well etched and inked is easy to read and not to rub off - Etched by high precision process and inked after that not just printing on it, office, school, the stainless steel metal Ruler is easy to read and more durable.

Stainless steel Ruler Non slip heavy 0 Conversion table at the backside could help you make conversion fast between inch and cm. No-questions-asked, 100% money back if new metal rulers are defective or you are not happy with them. This stainless steel metal ruler is great choice for kids, and engineering and crafting use.

Direct switch between inch & cm measure by separate marking & conversion table at back side - Make the graduation for inch and cm separately at each side, you could read the markings directly by simple turning over the metal ruler. 04 inch thick stainless steel ruler, heavy enough and thick enough to keep from sliding on paper and not easy to be bent.

Gimars 3 Pcs Nonslip Unique Measure on Both Ends Design 6 +12 inch Stainless Steel Metal Ruler Kit, Easy to Read Inch&mm&cm Directly, More Polished Edge for School, Office, Architect, Engineers, Craft #ad - More grinding and polishing process than other suppliers ensure the edges smooth and draw line straight, safer to you and your kids. Unique design graduation to both ends makes it possible to measure directly at any corners with high accuracy - Metal rule with 0 starts from the edge and easy reads to the end, so you could easily and directly measure at any corners with high accuracy.

04 inch thick stainless steel ruler with smooth grinded & polished edges - 0 .

More information about Gimars #ad

Gimars 3pcs Safety Polished and Sanded 6+12 Inch Metal Ruler Stainless Steel Ruler No Cork, Easy Read Measure on Both Ends with Inch&mm&cm for Kids, Architect, Engineers, Office, School, Craft

#ad
#ad
Gimars #ad - Sold as 3 pack 12 in ruler 1X, 6 in ruler 2x. No-questions-asked warranty, 100% Money back if new metal rulers are defective or you are not happy with them. And free kids from pressing rulers to make it stay in place when drawing lines, more easy and effortless. More polished and sanded edges and corners make it smooth and safe for kids and engineers to draw line straight - With more dedicated polishing and sanding process than other suppliers, these stainless steel rulers have smooth edges and safe to draw line straight.

Safe for you and your kids. Deeper etched and well inked marking makes metal rulers set clear & easy to read and not to rub off after long time usage - These stainless steel rulers are etched deeper before ink process not like the others just printing on it, which makes the marking clear and easy to read.

Gimars ruler kits thicker heavy stainless steel ruler sturdy enough to stay in place for engineering drawing and less efforts for kids to use - Made of heavy duty stainless steel with 004 inch thickness, these metal rulers are heavy enough to keep in place from sliding. Durable to last a long time usage.

Gimars 3pcs Safety Polished and Sanded 6+12 Inch Metal Ruler Stainless Steel Ruler No Cork, Easy Read Measure on Both Ends with Inch&mm&cm for Kids, Architect, Engineers, Office, School, Craft #ad - Measure at any corners by graduation to both ends/direct switch between inch & cm by marking etched at each side - Gimars metal ruler set could measure at any corners by 0 starting from the edge and reading to the end. Not easy to rub off. Very easy to read Inch & cm separately by direct etched graduation at each side.

More information about Gimars #ad


Similar products



T Square, T Ruler, 12 inch Metal Ruler, T Square Ruler, Drafting Tools, Architect Ruler, Set Square, Drafting Ruler, Tsquare, Truler, Architectural Triangle, Tee Ruler, L Square, Scale Ruler - Mr. Pen

#ad
#ad
Mr. Pen #ad - Durable to last a long time usage. Measure at any corners by graduation to both ends/direct switch between inch & cm by marking etched at each side - Gimars metal ruler set could measure at any corners by 0 starting from the edge and reading to the end. Mr. Pen – truler is designed to equip architects, draftsmen, engineers and artists with the right tool for various projects.

Can be used as T square, L square, L ruler. Safe for you and your kids. Deeper etched and well inked marking makes metal rulers set clear & easy to read and not to rub off after long time usage - These stainless steel rulers are etched deeper before ink process not like the others just printing on it, which makes the marking clear and easy to read.

T Square, T Ruler, 12 inch Metal Ruler, T Square Ruler, Drafting Tools, Architect Ruler, Set Square, Drafting Ruler, Tsquare, Truler, Architectural Triangle, Tee Ruler, L Square, Scale Ruler - Mr. Pen #ad - Made from high impact carbon steel for durability. No burrs or sharp scratches around. The package includes: 1 t-ruler: 12 inch / 30 cm ruler 12in / 30cm graduated head made from high impact carbon steel Black body with large white prints Precise laser printed inch and centimeter measurements Perfect for architects, L square, engineers and artists Can be used as T square, L ruler Thicker heavy stainless steel ruler sturdy enough to stay in place for engineering drawing and less efforts for kids to use - Made of heavy duty stainless steel with 0.

04 inch thickness, these metal rulers are heavy enough to keep in place from sliding. Not easy to rub off. 12inch/30cm calibrated t head. Sold as 3 pack 12 in ruler 1X, 6 in ruler 2x.

More information about Mr. Pen #ad


Similar products



eBoot 2 Pack Stainless Steel Ruler Machinist Engineer Ruler, Metric Ruler with Markings 1/8, 1/16, 1/32, 1/64 Inch for Engineering, School, Office, Architect, and Drawing 6 Inch

#ad
#ad
eBoot #ad - And the size of this metal ruler is 6 x 075 x 003 inches. Double-face precision graduation:  This stainless steel ruler has precision graduation on each side. Practical uses: precision stainless steel ruler is handy to use as drawing straight edge or measuring device; Good for office, school, drawing, engineering and other tasks.

Warm notice: the ruler has squared off angles, please pay attention to it avoid scratching your hand; Children use under adult supervision. 1/ 64 inches and 1/ 32 inches gradations on one side; 1/ 16 inches and 1/ 8 inches graduation on the reverse side. Clear engraved markings:  markings are engraved onto the ruler so they will not rub off over time; And the clear marks on stainless steel is helpful for your convenient measurement.

eBoot 2 Pack Stainless Steel Ruler Machinist Engineer Ruler, Metric Ruler with Markings 1/8, 1/16, 1/32, 1/64 Inch for Engineering, School, Office, Architect, and Drawing 6 Inch #ad - Common application:  Precision stainless steel rulers are handy for a variety of applications. Durable to last a long time usage. Measure at any corners by graduation to both ends/direct switch between inch & cm by marking etched at each side - Gimars metal ruler set could measure at any corners by 0 starting from the edge and reading to the end.

This metal ruler is easy to use as drawing straight edge or measuring device. Very easy to read Inch & cm separately by direct etched graduation at each side. This precision ruler is made of durable stainless steel for your long lasting use.

More information about eBoot #ad


Similar products



Stanley 33-158 5m/16 x 3/4-Inch PowerLock Tape Rule

#ad
#ad
Stanley 33-158 #ad - 16'5m x 3/4" blade. 16" and 19. 2" stud center markings on blade for framing purposes. Not easy to rub off. 16" and 19. 2" stud center markings on blade for framing purposes. Stanley hand Tools is a brand of hand tools. Can be used as T square, L square, L ruler. Clear engraved markings: markings are engraved onto the ruler so they will not rub off over time; Clear marks provide accurate measurement.

Made from high impact carbon steel for durability. No burrs or sharp scratches around. Centimeter graduation. Heat treated spring for longer life. It is a division of stanley black & decker, following the 2010 merger of The Stanley Works with Black & Decker Thicker heavy stainless steel ruler sturdy enough to stay in place for engineering drawing and less efforts for kids to use - Made of heavy duty stainless steel with 0

Stanley 33-158 5m/16 x 3/4-Inch PowerLock Tape Rule #ad - 04 inch thickness, these metal rulers are heavy enough to keep in place from sliding. T-ruler is largely and accurately laser printed on both sides. Easy reach blade remains rigid for 7'. Practical uses: precision stainless steel ruler is handy to use as drawing straight edge or measuring device; Good for office, school, drawing, engineering and other tasks.

Warm notice: the ruler has squared off angles, please pay attention to it avoid scratching your hand; Children use under adult supervision. Durable ruler: maximum measuring length is up to 6 inches; Quantity: 2 x rulers, which are made of sturdy stainless steel for your long lasting use.

More information about Stanley 33-158 #ad


Similar products



Xacto X5282 Basic Knife Set

#ad
#ad
Elmer's Products X5282 #ad - Easy reach blade remains rigid for 7'. Now you can purchase the original x-acto knife numbers 1, and 5 along with a full set of X-ACTO precision knife blades, 2, all in one convenient set. Attaining this level of precision, accuracy and reliability starts with supreme quality craftsmanship. Practical uses: precision stainless steel ruler is handy to use as drawing straight edge or measuring device; Good for office, drawing, school, engineering and other tasks.

Warm notice: the ruler has squared off angles, please pay attention to it avoid scratching your hand; Children use under adult supervision. Centimeter graduation. Durable ruler: maximum measuring length is up to 6 inches; Quantity: 2 x rulers, which are made of sturdy stainless steel for your long lasting use.

Xacto X5282 Basic Knife Set #ad - Double-face graduation: graduation on each side is precision; 1/ 64 inches and 1/ 32 inches gradations on one side; 1/ 16 inches and 1/ 8 inches graduation on the other side. The original x-acto knife has been praised for more than 50 years as the standard for precision. 5 knife for precision cutting of heavy weight materials; and numbers 2, 18, 19, 17, 11, 10, 16, 22, 7, and 24 precision knife blades.

Very easy to read Inch & cm separately by direct etched graduation at each side. This is an aftermarket of generic part. 1 knife for precision cutting and trimming of lightweight materials, No.

More information about Elmer's Products X5282 #ad


Similar products



ZERRO Professional Self-Healing Cutting Mat Double Sided Thick 5-Ply with Imperial/Metric 18" x 24" A2

#ad
#ad
ZERROCRAFT CTMGA2 #ad - Not easy to rub off. Double-face graduation: graduation on each side is precision; 1/ 64 inches and 1/ 32 inches gradations on one side; 1/ 16 inches and 1/ 8 inches graduation on the other side. Clear engraved markings: markings are engraved onto the ruler so they will not rub off over time; Clear marks provide accurate measurement.

Sold as 3 pack 12 in ruler 1X, 6 in ruler 2x. No-questions-asked warranty, 100% Money back if new metal rulers are defective or you are not happy with them. Black t ruler 12in, perfect for architects, engineers and artists. It comes with a 3 years full money back manufacturer'S GUARANTEE. And free kids from pressing rulers to make it stay in place when drawing lines, more easy and effortless.

More polished and sanded edges and corners make it smooth and safe for kids and engineers to draw line straight - With more dedicated polishing and sanding process than other suppliers, these stainless steel rulers have smooth edges and safe to draw line straight. Practical uses: precision stainless steel ruler is handy to use as drawing straight edge or measuring device; Good for office, school, drawing, engineering and other tasks.

ZERRO Professional Self-Healing Cutting Mat Double Sided Thick 5-Ply with Imperial/Metric 18" x 24" A2 #ad - Warm notice: the ruler has squared off angles, please pay attention to it avoid scratching your hand; Children use under adult supervision. Safe for you and your kids. Deeper etched and well inked marking makes metal rulers set clear & easy to read and not to rub off after long time usage - These stainless steel rulers are etched deeper before ink process not like the others just printing on it, which makes the marking clear and easy to read.

More information about ZERROCRAFT CTMGA2 #ad


Similar products



US Art Supply 12" x 18" GREEN/BLACK Professional Self Healing 5-Ply Double Sided Durable Non-Slip PVC Cutting Mat Great for Scrapbooking, Quilting, Sewing and all Arts & Crafts Projects

#ad
#ad
US Art Supply USA CM-12X18-GB #ad - Practical uses: precision stainless steel ruler is handy to use as drawing straight edge or measuring device; Good for office, school, drawing, engineering and other tasks. Warm notice: the ruler has squared off angles, please pay attention to it avoid scratching your hand; Children use under adult supervision.

Inch and centimeter measurements graduated in 16th of inch and 1mm. These 3mm thick pvc mats feature a durable 5-layer construction, non-glare surface, a non-slip, 1/2" grid with 1/8" marks for precise alignment as well as 45° and 60° guides. Clear engraved markings: markings are engraved onto the ruler so they will not rub off over time; Clear marks provide accurate measurement.

T-ruler is largely and accurately laser printed on both sides. Durable to last a long time usage. Measure at any corners by graduation to both ends/direct switch between inch & cm by marking etched at each side - Gimars metal ruler set could measure at any corners by 0 starting from the edge and reading to the end.

US Art Supply 12" x 18" GREEN/BLACK Professional Self Healing 5-Ply Double Sided Durable Non-Slip PVC Cutting Mat Great for Scrapbooking, Quilting, Sewing and all Arts & Crafts Projects #ad - 12inch/30cm calibrated t head. Stanley - Black & Decker. Xacto basic knife set for lightweight precision cutting. Thicker heavy stainless steel ruler sturdy enough to stay in place for engineering drawing and less efforts for kids to use - Made of heavy duty stainless steel with 004 inch thickness, these metal rulers are heavy enough to keep in place from sliding.

More information about US Art Supply USA CM-12X18-GB #ad


Similar products



iGaging IP54 Electronic Digital Caliper 0-6" Display Inch/Metric/Fractions Stainless Steel Body

#ad
#ad
iGaging 100-333-8B #ad - Easy reach blade remains rigid for 7'. Features: easy read super large display 2-3/8"x7/8" IP54 - splash water, oil and dust resistant hardened stainless steel precision lapping finish range: 0-6 inch accuracy: 0001 inch repeatability: 00005 inch resolution: 00005"/001mm/1/128". Can be used as T square, L square, L ruler.

1/2" grid with 1/8" marks for precise alignment as well as 45° and 60° guides. The green/black mats are reversible with grid markings on each side. Cutting mats also have lines for cutting diagonals. Strong&durable:our heavy duty mats resist curling and warping. Protect your table top from sharp blades, writing instruments and other art and craft tools.

iGaging IP54 Electronic Digital Caliper 0-6" Display Inch/Metric/Fractions Stainless Steel Body #ad - Thicker heavy stainless steel ruler sturdy enough to stay in place for engineering drawing and less efforts for kids to use - Made of heavy duty stainless steel with 004 inch thickness, these metal rulers are heavy enough to keep in place from sliding. Clear engraved markings: markings are engraved onto the ruler so they will not rub off over time; Clear marks provide accurate measurement.

Durable ruler: maximum measuring length is up to 6 inches; Quantity: 2 x rulers, which are made of sturdy stainless steel for your long lasting use. Easy read with the largest LCD display available. No other caliper offer you 4 digits Decimal in SAE mode or 1/128 inch fractional display.

More information about iGaging 100-333-8B #ad


Similar products



Alvin 10-Inch, 30/60 and 8-Inch 45/90 Triangle Set ANLX810G

#ad
#ad
Alvin LX810G #ad - Clear engraved markings: markings are engraved onto the ruler so they will not rub off over time; Clear marks provide accurate measurement. Raised inking edge prevents smudging. Highly recommended by crafters, quilters, and hobbyists. Double-sided mat:professional-quality, quilting, double-sided mat with grid lines angles.

Great for crafts, cutting projects or use as a desktop mat. Accurate cutting: the self healing mat contains different sets of CLEAR grid lines, ⅛ measurements, and angles that will GREATLY help the cutting process. Thick with self-healing:3mm, 5-ply construction for heavy duty cutting, compatible with rotary cutters.

Alvin 10-Inch, 30/60 and 8-Inch 45/90 Triangle Set ANLX810G #ad - Reseals surface cuts, providing a continually smooth surface for all cutting projects. Exceed your expectations: proven and trusted. Durable ruler: maximum measuring length is up to 6 inches; Quantity: 2 x rulers, which are made of sturdy stainless steel for your long lasting use. Comes with a variety of blade types including straight edge, general purpose, fine point, and scoring blades.

6. 5-by-5. 5-by-1. 5-inches ; 10

More information about Alvin LX810G #ad


Similar products



Dahle Vantage 10672 Self-Healing 5-Layer Cutting Mat Perfect for Crafts and Sewing 24" x 18" Black Mat

#ad
#ad
Dahle 10672-12581 #ad - And free kids from pressing rulers to make it stay in place when drawing lines, more easy and effortless. More polished and sanded edges and corners make it smooth and safe for kids and engineers to draw line straight - With more dedicated polishing and sanding process than other suppliers, these stainless steel rulers have smooth edges and safe to draw line straight.

Dahle Vantage 10672 Self-Healing 5-Layer Cutting Mat Perfect for Crafts and Sewing 24" x 18" Black Mat #ad - Ideal for cropping photos, sewing, cutting, and crafting. This is an aftermarket of generic part. Heat treated spring for longer life. Size: 10 inches. 12inch/30cm calibrated t head. Comes with a variety of blade types including straight edge, general purpose, fine point, and scoring blades.6. 5-by-5. 5-by-1. 5-inches ; 10

1-ounces. Durable ruler: maximum measuring length is up to 6 inches; Quantity: 2 x rulers, which are made of sturdy stainless steel for your long lasting use. High quality New!!!!!!! Xacto basic knife set for lightweight precision cutting. Made from high impact carbon steel for durability.

More information about Dahle 10672-12581 #ad


Similar products