ENDPAGE 3157 3155 3457 4157 White/Amber Switchback LED Bulb, 2-pack, Super Bright, 62-SMD with Projector Lens, Xenon White for Daytime Running Light/Parking Light, Yellow for Turn Signal Blinkers

#ad
#ad
ENDPAGE #ad - Application: light up xenon white for parking lights or daytime running lights; Light up Amber for turn signal lights; The turn signal flashes "amber-off-amber-off, " instead of "amber-white-amber-white, " which makes it easier to see. The energy-efficient bulb operates within a 10-30V DC range, will work great for 12V and 24V vehicles.

And is designed to last up to 30, 000 hours, 25 times longer on your car, SUV, truck, or van than your original stock bulbs. Safe driving is key each 3157 switchback led bulb has high brightness 31 amber and 31 white 4014 LED chips that create a 360°viewing angle for better, allover light emission to upgrade your car with super bright light to alert other divers earlier.

ENDPAGE 3157 3155 3457 4157 White/Amber Switchback LED Bulb, 2-pack, Super Bright, 62-SMD with Projector Lens, Xenon White for Daytime Running Light/Parking Light, Yellow for Turn Signal Blinkers #ad - Please check the measurement of our item and the socket type of your vehicle before purchasing to make sure you get the correct item. The lamp compatibility guides available online and Amazon filter system may not be 100% accurate or up to date. Cross reference: 3157 3157a 3057 3155 3157na 3357 3457 3457a 4057 4114 4157 etc.

We are committed to produce more energy conservative and longer lifespan LED bulbs with our advanced technology. Note: ▪for most vehicles, you may need the 50w 6-ohm load resistor or flasher relay to prevent the hyper flash or the bulb does not blink due to led bulbs draw much less power than stock lamp.

Output: 500lm/white, 450lm/amber | lifespan: 30, 000 hours | length: 2. 4"; diameter: 0

More information about ENDPAGE #ad

50W 6Ohm LED Load Resistors for LED Turn Signal Lights or LED License Plate Lights Fix Hyper Flash, Warning Cancellor

#ad
#ad
XKGLOW XK-RE-6-50W #ad - This is a pair of 6 ohm 50w led load resistors for LED Turn Signal Light Fix or LED License Plate Lights Error Fix. These 6 ohm, 50 watt led load resistors will work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb 2 Amp load.

This will solve led related turn signal lights or license plate light problems such as hyper flashing, no flashing or burnt out bulb indications. Will work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb 2 Amp load.

50W 6Ohm LED Load Resistors for LED Turn Signal Lights or LED License Plate Lights Fix Hyper Flash, Warning Cancellor #ad - One led resistor is required for each turn signal bulb or each license plate light bulb. 2 pc 50 watt 6ohm load Resistors + 4pc Quick wire Clip. One led resistor is required for each turn signal bulb or each license plate light bulb. A pair of 6 ohm 50w led load resistors for led turn Signal Light Fix or LED License Plate Lights Error Fix.

This will solve led related turn signal lights or license plate light problems such as hyper flashing, no flashing or burnt out bulb indications.

More information about XKGLOW XK-RE-6-50W #ad


Similar products



ENDPAGE 3157 3156 3057 3056 LED Bulb 2-pack, Brilliant Red, Extremely Bright, 21-SMD with Projector Lens, 12-24V, Works as Brake Lights, Tail Lights, Turn Signal Blinkers

#ad
#ad
ENDPAGE #ad - We are committed to produce more energy conservative and longer lifespan LED bulbs with our advanced technology. Cross reference: 3047, 3155, 4157k, 3357, 3357a, 3454na, 3157k, 3457a, 3157NA, 5702AK. Will work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb 2 Amp load.

One led resistor is required for each turn signal bulb or each license plate light bulb. 2 pc 50 watt 6ohm load Resistors + 4pc Quick wire Clip. Note: for turn signal lights, the 50w 6-ohm load resistor or flasher relay needed to prevent the hyper flash or the bulb does not blink. Application: brake lights, center high mount Stop 3rd brake Lights, Turn Signal Lights, Tail Lights, Blinker Lights, Side Marker Lights.

ENDPAGE 3157 3156 3057 3056 LED Bulb 2-pack, Brilliant Red, Extremely Bright, 21-SMD with Projector Lens, 12-24V, Works as Brake Lights, Tail Lights, Turn Signal Blinkers #ad - The energy-efficient bulb operates within a 10-30V DC range, will work great for 12V and 24V vehicles. We love our customers and offer a "ONE YEAR" return or replacement guarantee from purchase date. A pair of 6 ohm 50w led load resistors for led turn Signal Light Fix or LED License Plate Lights Error Fix.

This will solve led related turn signal lights or license plate light problems such as hyper flashing, no flashing or burnt out bulb indications. And is designed to last up to 30, suv, 000 hours, truck, 25 times longer on your car, or van than stock bulbs. Safe driving is key this 3157 dual-contact bulb has 21 leds 2835 SMD that create a 360°viewing angle for better, allover light emission to upgrade your car with super bright light to alert other divers earlier.

More information about ENDPAGE #ad


Similar products



4Pcs Aaron 50W 6ohm Load Resistors - Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code Resistors get very hot during working

#ad
#ad
A4-50W-6ohm #ad - Safe driving: 21 high performance 2835 led chips per bulb give off a 360 degree Extremely Bright Red light, assuring you will be seen more clearly and from further away during daytime and night, 300% brighter than original stock bulb, providing other drivers more time to react. One year warranty** guaranteed against manufacturer defect.

Buy with confidence!!! Each bulb was tested before shipping. Application: brake lights, 4157na, 3057a, 3457k, 4157, 5702a, 3057, tail lights, 3156k, 3457na, turn signal lights, 3456, 3056, 4114, 3157, 3356, 3457, 3156, 4156, 4057, 3757a, 3157a, center high mount stop 3rd brake. Will work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb 2 Amp load.

4Pcs Aaron 50W 6ohm Load Resistors - Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code Resistors get very hot during working #ad - One led resistor is required for each turn signal bulb or each license plate light bulb. 2 pc 50 watt 6ohm load Resistors + 4pc Quick wire Clip. Package include: 4pcs 2 pairs 50W 6 ohm Load resistors with 8Pcs T-Taps. Please do your research before purchase about what kind of load resistors you need for your car: 3ohm, 6ohm or 9ohm.

Lifespan: 30, 000 hours | length: 2. 6"; diameter: 075" | operating voltage: 12V-24V DC | Wattage: 0

More information about A4-50W-6ohm #ad


Similar products



4PCS ARTR 50W 6ohm Load Resistors - Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error CodeResistor gets very hot during working

#ad
#ad
ARTR ARTR-50W-6ohm-4 #ad - Package include: 4pcs 50w 6ohm Load resistors with 8Pcs T-Taps. For long-wire version, please search item B00VCSRI4A. Just connect the wires with the splice taps provided. Non-polarity design for easy plug and play installation. Attention** when used as turn signal flashers, you might need to add 50w 6-ohm load resistors or change your flasher relay to prevent the hyper flash or error code on the dashboard.

Solution for "bulb out signal" / "OBC error message" after installing SMD LED light bulb. Solution for fast turn signal Blinking response after installing SMD LED light bulb. Load resistors heat up like light bulbs and get really HOT when working. Mount them on metal surface, NOT plastic. Installation is easy.

4PCS ARTR 50W 6ohm Load Resistors - Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error CodeResistor gets very hot during working #ad - Solution for fast turn Signal Blinking response after installing LED light bulb. Led load resistor will not solve LED bulbs flashing issue, which mean the LED bulb is defective. Load resistors heat up like light bulbs and get really HOT when working. Lifespan: 30, 000 hours | length: 2. 6"; diameter: 075" | operating voltage: 12V-24V DC | Wattage: 0

More information about ARTR ARTR-50W-6ohm-4 #ad


Similar products



ENDPAGE 3157 3156 3057 3056 LED Bulb 2-pack, Amber Yellow, Extremely Bright, 21-SMD with Projector Lens, 12-24V, Works as Turn Signal Blinker Lights

#ad
#ad
ENDPAGE #ad - Safe driving: 21 high performance 2835 led chips per bulb give off a 360 degree Extremely Bright amber light, assuring you will be seen more clearly and from further away during daytime and night, 300% brighter than original stock bulb, providing other drivers more time to react. One year warranty** guaranteed against manufacturer defect.

A pair of 6 ohm 50w led load resistors for led turn Signal Light Fix or LED License Plate Lights Error Fix. This will solve led related turn signal lights or license plate light problems such as hyper flashing, no flashing or burnt out bulb indications. Safe driving: 21 high performance 2835 led chips per bulb give off a 360 degree Extremely Bright Red light, assuring you will be seen more clearly and from further away during daytime and night, 300% brighter than original stock bulb, providing other drivers more time to react.

ENDPAGE 3157 3156 3057 3056 LED Bulb 2-pack, Amber Yellow, Extremely Bright, 21-SMD with Projector Lens, 12-24V, Works as Turn Signal Blinker Lights #ad - One year warranty** guaranteed against manufacturer defect. Buy with confidence!!! Each bulb was tested before shipping. Application: brake lights, 3157a, turn signal lights, 3057a, 3457na, tail lights, 3757a, 4157na, 3156, 5702a, 3356, 3156k, 3457k, 3057, 3157, 4114, 3056, 4157, 3456, 4156, 3457, 4057, center high mount stop 3rd brake.

This 3157 led bulb with projector will upgrade your car with extremely bright amber Yellow light to be More NOTICEABLE when driving! Best value in the market! ENDPAGE is the Amazon registered brand and specialized in LED Lights for several years. Non-polarity design for easy plug and play installation.

Attention** when used as turn signal flashers, you might need to add 50w 6-ohm load resistors or change your flasher relay to prevent the hyper flash or error code on the dashboard.

More information about ENDPAGE #ad


Similar products



CUTEQUEEN TRADING 4pcs 50W 6Ohm LED Load Resistors for LED Turn Signal Lights or LED License Plate Lights or DRL Fix Hyper Flash, Warning Cancellor pack of 4

#ad
#ad
Cutequeen JIANXIN-06-05-01-C002 #ad - Cross reference: 3047, 3357a, 3155, 3157k, 3454na, 3357, 3457a, 4157k, 3157NA, 5702AK. Just connect the wires with the splice taps provided. Load resistors for led turn signal light fix or led license Plate Lights Error Fix. Buy with confidence!!! Each bulb was tested before shipping. Application: brake lights, 4114, 3457na, 3156, 4157, 3056, 4157na, 3456, 3457, 4156, 4057, 3157a, 3356, 3457k, turn signal lights, 3157, 3757a, 3057a, tail lights, 5702a, 3057, 3156k, center high mount stop 3rd brake.

Cross reference: 3047, 5702a, 3757a, 3457a, 4114, 3357a, 4057, 3457, 3457na, 3454na, 3456, 3156K, 5702AK. Solution for fast turn Signal Blinking response after installing LED light bulb. Led load resistor will not solve LED bulbs flashing issue, which mean the LED bulb is defective. Load resistors heat up like light bulbs and get really HOT when working.

CUTEQUEEN TRADING 4pcs 50W 6Ohm LED Load Resistors for LED Turn Signal Lights or LED License Plate Lights or DRL Fix Hyper Flash, Warning Cancellor pack of 4 #ad - Buy with confidence!!! Each bulb was tested before shipping. Application: turn signal lights, 3057a, 3157, 3156, 3457k, 3155, 4157na, 3157k, 4156, 4157k, 3356, 3056, side marker light, 3157a, 3057, 3157na, 3357, 4157, corner lights, blinker lights. Built with full aluminum housing for better heat distribution and built in stable Constant Current IC Driver for Longer lifespan- 25 times longer than halogen/incandescent bulbs.

Each led bulb installation requires one resistor connected in parellel see picture below for instruction. This will solve led related turn signal lights or license plate light problems, no flashing or burnt out bulb indications ".

More information about Cutequeen JIANXIN-06-05-01-C002 #ad


Similar products



iBrightstar Newest 9-30V Super Bright Low Power 3156 3157 3057 4157 LED Bulbs with Projector Replacement for Back Up Reverse Lights or Tail Brake Lights,Xenon White6500K

#ad
#ad
iBrightstar 3157-3014/3030-54/3W #ad - Non-polarity design for easy plug and play installation. Attention** when used as turn signal flashers, you might need to add 50w 6-ohm load resistors or change your flasher relay to prevent the hyper flash or error code on the dashboard. 4pcs 50 watt 6ohm load resistors + 8pc quick wire clip, We offer "ONE YEAR" warranty and Unconditional return policy with 30 days,.

Mount them on metal surface, NOT plastic. Installation is easy. Just connect the wires with the splice taps provided. 1 year warranty. Lifespan: 30, 000 hours | length: 2. 6"; diameter: 075" | operating voltage: 12V-24V DC | Wattage: 09-4. 4 watts. Important notice! please confirm the bulb base before placing an order.

iBrightstar Newest 9-30V Super Bright Low Power 3156 3157 3057 4157 LED Bulbs with Projector Replacement for Back Up Reverse Lights or Tail Brake Lights,Xenon White6500K #ad - Each led bulb installation requires one resistor connected in parellel see picture below for instruction. Mount it on metal surface, NOT plastic. It can work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb 2 Amp load.

Cross reference: 3047, 3357a, 3456, 3156k, 3457a, 3757a, 4114, 3454na, 3457na, 3457, 4057, 5702a, 5702AK.

More information about iBrightstar 3157-3014/3030-54/3W #ad


Similar products



AUXITO 194 LED Light Bulb 6000K White Super Bright 168 2825 W5W T10 Wedge 24-SMD 3014 Chipsets LED Replacement Bulbs Error Free for Car Dome Map Door Courtesy License Plate Lights Pack of 10

#ad
#ad
AUXITO 4333001474 #ad - Specification:voltage:12v power:2w/pc color:6000k white lumen:240lm/pc bulb dimensions:12*26mm net Weight:2g/Pc Feature: Fits directly into multiple bulb size sockets such as: 168 175 194 2825 912 921 W5W T10 Non-polarity design for easy plug and play installation. Attention** when used as turn signal flashers, you might need to add 50w 6-ohm load resistors or change your flasher relay to prevent the hyper flash or error code on the dashboard.

Solution for "bulb out signal" / "OBC error message" after installing SMD LED light bulb. Solution for fast turn signal Blinking response after installing SMD LED light bulb. Load resistors heat up like light bulbs and get really HOT when working. Cross reference: 3047, 3457a, 3357a, 4157k, 3157k, 3157na, 3357, 3454na, 3155, 5702AK.

Friendly customer service responses within 24 hours on business days. A pair of 6 ohm 50w led load resistors for led turn Signal Light Fix or LED License Plate Lights Error Fix. This will solve led related turn signal lights or license plate light problems such as hyper flashing, no flashing or burnt out bulb indications.

AUXITO 194 LED Light Bulb 6000K White Super Bright 168 2825 W5W T10 Wedge 24-SMD 3014 Chipsets LED Replacement Bulbs Error Free for Car Dome Map Door Courtesy License Plate Lights Pack of 10 #ad - Non-polarity design for easy plug and play installation. Attention** when used as turn signal flashers, you might need to add 50w 6-ohm load resistors or change your flasher relay to prevent the hyper flash or error code on the dashboard. 4pcs 50 watt 6ohm load resistors + 8pc quick wire clip, We offer "ONE YEAR" warranty and Unconditional return policy with 30 days,.

More information about AUXITO 4333001474 #ad


Similar products



Novita EP27 Flasher

#ad
#ad
Novita EP27 #ad - Buy with confidence!!! Each bulb was tested before shipping. Application: brake lights, 3456, 3457, 3356, 3156k, 4157na, 3057a, turn signal lights, 4157, 3157a, 3457na, 3457k, 3057, 4114, 3056, 4057, 3157, 4156, 5702a, tail lights, 3156, 3757a, center high mount stop 3rd brake. Non-polarity design for easy plug and play installation.

Attention** when used as turn signal flashers, you might need to add 50w 6-ohm load resistors or change your flasher relay to prevent the hyper flash or error code on the dashboard. 4pcs 50 watt 6ohm load resistors + 8pc quick wire clip, We offer "ONE YEAR" warranty and Unconditional return policy with 30 days,.

Cross reference: 3047, 4157k, 3157na, 3457a, 3157k, 3357a, 3155, 3454na, 3357, 5702AK. Solution for "bulb out signal" / "obc error message" after installing SMD LED light bulb. Will work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb 2 Amp load.

Novita EP27 Flasher #ad - One led resistor is required for each turn signal bulb or each license plate light bulb. 2 pc 50 watt 6ohm load Resistors + 4pc Quick wire Clip. One led resistor is required for each turn signal bulb or each license plate light bulb. Set of 2 bulbs54smd 3014 & 3smd 3030 high brightness chips per bulb, 24v vehicles, Working Voltage:9v-30v fit 12V, Size: 1.

More information about Novita EP27 #ad


Similar products



iJDMTOY 1 5-Pin EP27 FL27 Electronic LED Flasher Relay Fix For LED Turn Signal Bulbs Hyper Flash Fix

#ad
#ad
iJDMTOY Auto Accessories Fix LED Bulb Hyper Rapid Flashing Issue #ad - This ep27 is an electronic turn signal flasher that operates at 12 V. Safe driving: 21 high performance 2835 led chips per bulb give off a 360 degree Extremely Bright Red light, assuring you will be seen more clearly and from further away during daytime and night, 300% brighter than original stock bulb, providing other drivers more time to react.

One year warranty** guaranteed against manufacturer defect. 5 terminals b, I, E, h, L.162 watt / 13. 5 amp max. Load resistors get really HOT when working. Mount them on metal surface, NOT plastic. Installation is easy. Dimensions: 1. 2" x 1. 2" x 1. 5" - please check to make sure size is compatible, as this flasher relay may be larger than its original counterpart.

iJDMTOY 1 5-Pin EP27 FL27 Electronic LED Flasher Relay Fix For LED Turn Signal Bulbs Hyper Flash Fix #ad - Built with full aluminum housing for better heat distribution and built in stable Constant Current IC Driver for Longer lifespan- 25 times longer than halogen/incandescent bulbs. Please note that this led flash will only fix the LED bulb's hyper flash issue, not the wattage lower than stock bulb related "bulb out" warning message on dashboard.

Led electronic flasher relay fix for turn signal blinker lights to fix hyper flash problems. Each led bulb installation requires one resistor connected in parellel see picture below for instruction.

More information about iJDMTOY Auto Accessories Fix LED Bulb Hyper Rapid Flashing Issue #ad


Similar products